The whole idea behind this exciting new line of wedges was feel and spin. Once the premise was set, SMT literally started this project from the ground up. They wanted classic shape, high spin profile, soft feel, and quality and ended up with The Durometer Series Wedges. SMT's first venture into the field of "scoring clubs" is already a huge winner. The Durometer Series Wedges feature a "feel cartridge" built right into the sleek, tapered neck of the clubhead. Independent testing shows the insert cartridge will absorb up to 14% of the shock of impact. Combine that with a special heat treated 303 soft cast stainless steel, CNC milled flat faces and grooves that are machined into the clubface one at a time, afford you the ultimate in feel and spin characteristics. 6 lofts in each cartridge system are sure to fill in the gaps that you might see in your current wedge game. Give one a try and see why we are so excited about this unique design!

49, 51, 53, 55, 57, or 59 degree lofts.

Click CUSTOMIZE below to build your wedge!

Redistributed weight in the clubface produces ultimate ball control around the green. Professional grind sole makes it easy to lay open. Non-glare gunblack finish helps frame the ball at address.

Standard length is 35 1/2" on all lofts.

51, 55, or 59 degree lofts.

Click CUSTOMIZE below to build your wedge!

The Infiniti IP-3 is made of a soft cast 304 steel, with a matte chrome finish and a CNC milled face to maximize contact with the ball, which also maximizes spin. These wedges have a pre-grind sole which allows you to open the face for those high, soft landing flop shots. Weight has been drilled out of the toe to provide perfect balance in the clubhead for all types of lies.

Finally, a shank proof wedge other than an F2! This wedge head allows you to cut through any rough without worry about the hosel getting caught up. Also great for eliminating the deaded "skull" on the fairway or from anywhere, even sand!

Available in 52, 56 and 60!

Click CUSTOMIZE below to build your wedge!

CNC Milled soft forged Bang-O-Matic wedges! These are made for game improvment - nice wide sole and low center of gravity. A great match to the BOM irons, or great wedges for your bag by themselves!

Available in 50, 55 and 60, right handed. Bang headcovers are included!

• 50 (Gap) - 9 degree
• 55 (Sand) - 10 degree
• 60 (Lob) - 8 degree

Click CUSTOMIZE below to build your wedge!

The new CER 8620 Oil Soaked precision wedges bring a new look and more options to the best selling CER line. These classically styled wedges are investment cast from 8620 carbon steel for excellent feel. The 8620 carbon steel is used because it has similar hardness properties to the carbon steels used in the billet forging process. The CER Oil Soaked wedges are a raw carbon steel with the dark, natural finish of the raw material. The “Oil Soaked” refers to the protective oil that is put on the finish to prevent premature rusting.

Standard length is 35 1/2" on all lofts.

Bounce is as follows:

• 52 - (Gap) - 4 degree
• 56 - (Sand) - 12 degree
• 60 - (Lob) - 6 degree

Click CUSTOMIZE below to build your wedge!

LEFT HAND ONLY and comes in 52, 56, 60, and 64 degree.

Standard length is 35 1/2" on all lofts.

Bounce is as follows:

• 52 - (Gap) - 5 degree
• 56 - (Sand) - 12 degree
• 60 - (Lob) - 7 degree
• 64 - (High Lob) - 7 degree

Click CUSTOMIZE below to build your wedge!

Power Play System Q continues to develop its club line with its new System Q Dual Weight Port Wedges offered in 52°, 56°, and 60° lofts. The Dual Weight Ports come equipped with a 6 gram tungsten weight screw in both the heel and toe port to enhance the stability oand symmetry of this design. For those players who prefer a lighter feel, additional weight screws of 8 gram or 2 gram (available on the Accessories page) may be interchanged in the weight ports to match the feel that you require.

Standard length is 35 1/2" on all lofts.

Bounce is as follows:

• 52 - (Gap) - 8 degree
• 56 - (Sand) - 12 degree
• 60 - (Lob) - 6 degree

Click CUSTOMIZE below to build your wedge!

Crafted in a polished 431 stainless steel, these classic line wedges will provide exceptional quality and durability. Featured is its new "hoof-cavity" design which moves the weight farther out to the perimeter to provide you with increased forgiveness for precise distance control and consistency. And U-groove design offers maximum spin and control on the greens.

Available in 52, 56 and 60 degree, right handed only.  

Standard length is 35 1/2" on all lofts.

Bounce is as follows:

• 52 - (Gap) - 10 degree
• 56 - (Sand) - 14 degree
• 60 - (Lob) - 12 degree

Click CUSTOMIZE below to build your wedge!

The Professional Open 690 Wedges set the standard in quality and performance. The classic profile features a large face area, U-grooves for superior stopping-action, and a beveled sole. This is the classic standard satin version.

Available in right AND left handed in 52, 56, and 60 degree.

Standard length is 35 1/2" on all lofts.

Bounce is as follows:

• 52 - (Gap) - 10 degree
• 56 - (Sand) - 16 degree
• 60 - (Lob) - 12 degree

Click CUSTOMIZE below to build your wedge!

The Professional Open 690 Wedges set the standard in quality and performance. The classic profile features a large face area, U-grooves for superior stopping-action, and a beveled sole. This particular one is heat treated in black melonite for a unique, non-glare finish and a slightly softer feel. Black melonite is extremely durable and will provide many years of quality play, unlike some gunmetal wedges.

Available in 52, 56 and 60 degree, right handed only.  

Standard length is 35 1/2" on all lofts.

Bounce is as follows:

• 52 - (Gap) - 10 degree
• 56 - (Sand) - 16 degree
• 60 - (Lob) - 12 degree

Click CUSTOMIZE below to build your wedge!

The XDS Tour Oil Can wedge is made for a high caliber player. A traditional shape combined with modern specs create a wedge that can be used for virtually any situation. Oli Can finish is to reduce glare and will wear off some over time.

Comes in 52, 56 and 60 degree, right handed only.

Standard length is 35 1/2" on all lofts.

Bounce is as follows:

• 52 - (Gap) - 8 degrees
• 56 - (Sand) - 12 degrees
• 60 - (Lob) - 6 degrees

Click CUSTOMIZE below to build your wedge!

This is a great tool to get out of any sand trap. If you are familiar with the Hogan Sure Out, you can see the similarities. Gives you the confidence to get out of anywhere! 

Standard length is 35 1/2" and comes in RH only.

Click CUSTOMIZE below to build your wedge!